Sink and Faucet Installation in Los Angeles & Orange County
Replacing a dripping kitchen faucet, swapping a bathroom vanity sink, or fitting an undermount sink into new countertops – Oasis Plumbers handles the shut-off valves, supply lines, drain and trap, and leaves the sink tested and dry underneath.
Kitchen, bathroom, bar and laundry sinks · New supply lines with every install · Licensed plumbers · 0% financing up to 48 months
Kitchen sinks and faucets
Kitchen faucet replacement
Pull-down, pull-out, touchless or bridge faucets. We check the number of holes in your sink or counter first, add a deck plate or soap dispenser where needed, and connect new braided supply lines.
Kitchen sink installation
Drop-in, undermount and farmhouse (apron-front) sinks. For undermount and farmhouse models we work with your countertop installer on the cut-out and mounting, then connect the drain, disposal and dishwasher.
Filtered and instant hot water taps
A separate drinking-water faucet for an under-sink filter or reverse osmosis system, or an instant hot water dispenser. For filtration of the whole house, see whole house water filter installation.
Bathroom sinks and faucets
Vanity sink swaps, pedestal sinks, wall-mounted sinks and vessel sinks – vessel sinks need a taller faucet or a wall-mount spout, so we confirm the pairing before you buy. We install single-hole, centerset and widespread faucets and replace pop-up drains at the same time.
Check this before you buy a new sink or faucet
| What to check | Why it matters |
|---|---|
| Number of holes and their spacing | A single-hole faucet on a three-hole sink needs a deck plate; a widespread faucet needs three holes with the right spacing. |
| Sink type: drop-in, undermount or vessel | Decides the mounting method and the faucet height you need. |
| Spout reach and height | Tall pull-down spouts can hit a window sill or upper cabinet. |
| Shut-off valves under the sink | Old valves often seize or leak once they are turned; we replace them during the install. |
| Disposal and dishwasher connections | A new sink bowl depth or drain position can change how the trap and disposal line up. |
More buying tips: how to choose the right faucet and sink installation mistakes to avoid.
Repair the faucet instead?
A drip from the spout usually means a worn cartridge or O-ring, and low flow is often a clogged aerator – both are quick repairs. Replacement makes sense when the body is corroded, the base leaks into the cabinet or parts are no longer made. See why a faucet drips.
Included with every sink or faucet installation
- New braided supply lines
- Check, and replace if needed, the shut-off valves
- Drain and trap reconnected and sealed
- Full-pressure leak test with the cabinet dry
- Old fixture removed
Sink clogged or disposal not working?
Those are different jobs: see garbage disposal replacement and drain repair.
What affects the price of sink and faucet installation
- Faucet only, or sink and faucet together
- Sink type – undermount and farmhouse sinks take more work than drop-in
- New shut-off valves, trap or drain parts
- Disposal, dishwasher or filter connections
- Moving the sink or drain to a new position
We quote before we start.
Sink and faucet installation FAQs
How long does it take to install a new faucet?
Swapping a faucet on an existing sink is usually a short visit. Installing a new sink and faucet together, or moving the drain, takes longer.
Can you install a faucet or sink I bought myself?
Tell us the make and model when you book. We check that it fits your sink and counter before the visit so there are no surprises on the day.
Do I need new shut-off valves when I replace a faucet?
Not always, but old valves often stick or start leaking once they are turned. We test them during the install and replace any that don’t close fully.
Can a new kitchen faucet go on my existing sink?
Yes, as long as the faucet matches the number of holes in the sink or counter. A deck plate covers unused holes.
Undermount or drop-in sink: which is better?
Undermount sinks look cleaner and make wiping the counter easier, but need a solid-surface counter. Drop-in sinks work with any counter and are easier to replace later.
How much does kitchen faucet replacement cost?
It depends on the faucet, whether the shut-off valves and supply lines need replacing, and any filter or soap-dispenser connections. We give you the price before work starts.
Sink and faucet installation near you
Kitchen and bathroom installs are booked through our local offices. Choose the one nearest you:
Los Angeles County
- Sunland — 8348 Foothill Blvd, Sunland, CA 91040 · (805) 883-6154
- Santa Monica — 701 Pico Blvd #551, Santa Monica, CA 90405 · (310) 818-7582
- Calabasas — 24025 Park Sorrento #430, Calabasas, CA 91302 · (818) 330-1138
Orange County
- Laguna Hills — 25272 McIntyre St #558, Laguna Hills, CA 92653 · (949) 635-7337
- Anaheim — 800 S Brookhurst St, Anaheim, CA 92804 · (714) 706-3926
Book your sink or faucet installation
Have the new faucet or sink already? Send us the model number when you book so we come with the right parts. Call (888) 803-7895 or use the form.